Board Logo

J tubes what size od pipe ?
seagull - September 10th, 2004 at 07:47 PM

I have a set of headers , there 1 3/8" 35mm od is this a stock size for J tubes ?:beer

vw54 - September 10th, 2004 at 08:41 PM

yep

seagull - September 10th, 2004 at 08:46 PM

thanks dave :thumb

68AutoBug - September 11th, 2004 at 01:09 PM

[size=4]Hi Neil

The OD is just under 35mm ..

Lee - -- the J pipe measurer...

[/size]
better than a lubricator??

seagull - September 11th, 2004 at 10:08 PM

but it needs paint !

68AutoBug - September 11th, 2004 at 10:47 PM

Neil,
35mm with Paint....

I will have heater boxes on the engine when its on the road or sooner.... with flanges for attachment to the muffler....

they are painted in VHT Very High Temperature Paint....

naturally... maybe Yellow would have been a better colour...
or green... what about gold, or blue... Red, or white....
I really don't know how I picked silver....:):)

Lee --

seagull - September 12th, 2004 at 02:11 AM

Mate you make me :thumb with all that paint / oil lube , good work