Board Logo

Help Removing a 65 notch dash
Dannyboy - November 7th, 2004 at 04:03 PM

Help needed. I've taken out all the screws including the ones behing the chrome trim , now what????

Do i have to take the clocks out next ,and how and what about thje grab bar on the passenger side???????

Got to be out soon so i can get it restored

Any help is good , many thanks

Dan:o


Stanley - November 7th, 2004 at 04:36 PM

There are some screws up below the window and yes you need to take the grab handle off. You need to take your glovebox out.


Dannyboy - November 7th, 2004 at 07:25 PM

Thanks but do i have to remove the clocks first and if so how do they come out?

Many thanks

Dan;)


Stanley - November 7th, 2004 at 07:41 PM

when I did mine I pulled the drivers seat out and laid under the dash. If you feel behind the clock there are two springy bits 180deg apart that you squeeze together then push it out.

Do the same to the fuel guage. It has a potion on the back which houses all the wireing connectors and pulls off the back

Once you have these two out you van get thru the holes to get the speedo out remembering to diconnect the speedo drive.


Dannyboy - November 7th, 2004 at 08:46 PM

I'll give it a go this week , thanks. Crap , more work and money!!!!

Ta Dan;)