Board Logo

What's the Porsche PCD?
karmannghia60 - January 24th, 2003 at 03:16 PM

Is it 120mm? If so, its the same as the early Holden's then (HQ, etc)?
Raf

Unity-28 - January 24th, 2003 at 03:34 PM

Whats PCD????

I must sound reallly dumb!!!

karmannghia60 - January 24th, 2003 at 03:38 PM

Its Pitch Circle Diameter. Basically the diameter of a circle going through the centre of the wheel studs
Raf

Unity-28 - January 24th, 2003 at 03:56 PM

Now thats a language I can Understand!!!! Its 130mm on a porsche!!!

Hope I have helped!!!!:thumb

KruizinKombi - January 24th, 2003 at 08:14 PM

I think Holdens are 114mm, or is that Falcons? I dunno, they all look the same!!!:D

1303Steve - January 24th, 2003 at 11:52 PM

Hi

As already said they are 130 mm, thats the same as the 4 stud Beetle but the Porsche are 5 stud.

1302Steve

[Edited on 24-1-2003 by 1302Steve]

11CAB - January 25th, 2003 at 07:58 AM

Fords are 114, and kombi's are 112
And Holden is not the same PCD as porsche, not sure what it is, but am sure its not the same.

KruizinKombi - January 25th, 2003 at 08:11 AM

Yeah that makes sense. My Dad used to run Falcon wheels on his Hiace. It also accepted Mercedes wheels which we all know will fit on a kombi.:thumb

I had a 'mate of a mate' suggest that I put Falcon wheels on my kombi. When I pointed out the 2mm PCD difference he suggested I file out the stud holes on the wheel!! I know people have done this, but it must cause side loads on the studs with one side of the wheel nut seating on the wheel and the other side not. Please don't do this at home, kids! :o