Board Logo

type 3 disc conversion
Klaus - January 9th, 2005 at 10:04 PM

I've got a set of type 3 disc/ drum and disc fits fine but the caliper needs different mountings, was there an ealier stub that allowed the caliper to bolt up or do I have to make up an adapter on a drum stub? rears wont be a prob straight torsion n arm swap. be cool if someone could help.

bus914 - January 10th, 2005 at 05:23 PM

there are at least 2 types of type 3 calipers.

are you fitting them to another type 3?

[Edited on 10-1-2005 by bus914]

bus914 - January 10th, 2005 at 05:25 PM

.

Midlife crisis - January 10th, 2005 at 05:57 PM

there is also 2 sizes in the mounting bolts for the caliper on to the car

Marc

Klaus - January 10th, 2005 at 09:00 PM

aha I shall measure them up . they are destined for my 71 ball joint front.