Aussieveedubbers - Powered by GaiaBB

94mm Heads

NCH-003 - January 22nd, 2005 at 06:19 PM

Hi there.....Just wondering if it was fine to put 94mm heads on to a 1610 motor or is there more that needs to be done to engine for these heads to have any kind of differance to the performance.Any help would be welcomed.:jesus

MickH - January 22nd, 2005 at 08:34 PM

Umm.....you would need to put 94mm barrels on the engine for the heads to fit..:alien

NCH-003 - January 22nd, 2005 at 08:47 PM

Ok thanks for that...

RENNWAGEN - January 23rd, 2005 at 02:38 PM

You will need to machine your case to accept 94mm P+C's then your heads will fitt but then you wont have a 1610 anymore either