Board Logo

pop outs
type_one - February 11th, 2003 at 07:29 PM

Can anyone tell me if there is a difference between 6v and 12v pop out windows. Are the back windows on both models a different size. can i use 12v on a six volt visa versa. What are the differences? I was told that it was just the knob but am now not to sure.

Craig Torrens - February 11th, 2003 at 07:33 PM

6V are smaller windows !

vw54 - February 12th, 2003 at 05:57 AM

both windows are different sizes and the pop outs to suit are NOT interchangable.

[Edited on 11-2-2003 by vw54]

type_one - February 12th, 2003 at 07:32 AM

Well how can I tell them apart from just looking at them. Or do I have to put it up to the window to see that. I was told that the later one have black knobs and the earlier ones have white knobs. Is this correct?

Unity-28 - February 12th, 2003 at 09:35 AM

Early Pop-outs dont have a hole in the glass for the opening clip to attatch to. the latch is attatched to the steel trim!!! Thats how you tell them apart!!! They are also a lot harder to get your hands on!!!

Cheers N!

type_one - February 13th, 2003 at 07:50 AM

Thanks Unity-28. That means mine are late model ones and thats not good for putting in an oval. Oh well. Can't win em all.