Afternoon all

Seems my hazards have developed a strange problem. They used to work perfectly, but are now broken. I've changed nothing between them working and not and can't see anything wrong, no wires disconnected or anything.

The symptoms are when you pull the switch, it makes a single noise that sounds like it's trying to flash, but no lights come on.

Nothing else seems to be affected.

Anyone got any clues? New switch time perhaps?

Andrew

I would've thought this is from a faulty relay but I a no expert
Raf

check all the earths

Had this problem in Genevieve. Changed the indcator relay and that fixed it for a few weeks but then it stopped again. It ended up it was the hazard switch unit itself that needed to be replaced.