Board Logo

Blinkers not working?
GTMac - December 12th, 2005 at 06:00 PM

Guys, I turn the blinkers on either way and just the dash light arrows come on, no blink and no external lights. Have checked all bulbs are fine and then checked for 12v to each light.

I am not getting power to front left blinker so do I assume this is effecting the whole operation?

Terminals are fine behind the light so where should I start to trace back to find this fault. Its in a Type 3 Fasty.

Thanks


pyr0 - December 12th, 2005 at 06:02 PM

check the blinker cam ;) also the harzard light switch, if that goes it'll do what happenin to ya.

but yes trace the problem with the blinker not getting power cause they wont blink if ones not workin


GTMac - December 13th, 2005 at 08:07 AM

OK, I checked the hazard switch and the blinkers are all working thus power is going to the previous faulty light. Do I then assume it is the flasher unit for the blinkers that is faulty?