I am currently fitting bay window kombi brakes to my split van. I have run a vacuum line from my carbs but am unsure of where toattach the line on my servo there seems to be two air inlets one on the main diaphragm and one on the pushrod. Idont have a bay handy to have a look at so if anyone could give me some guidence it would be appreciated. Shane.

hi shane...the vacuum needs to come from your inlet manifold not your carbies...you need like a 10 or 12 mil hose....

Yeah, Ive run the lines off the fittings on the manifolds on my kadrons its the other end I'm not sure of.

the vacum line runs into the booster diaphram..the other is a breather valve cheers steve

Thanks for that youve saved me having to crawl under someone's bus in Woolies carpark tomorrow