can i use a type 3 auto irs subframe to convert a swing-axle type 3 to manual irs?

are the axles and cv's the same?

The type 3 auto has a long and a short axle , about 12?mm longer/shorter than the standard type 1/3 axle.
I cv's are the same and I think the subframes were the same.

The front mount is different.

[ Edited on 16-5-2006 by DallanMulley ]

if you go this way auto rear & you have the axles from the auto left over , please dont throw them away .I have a need for some

cheers seagull