Hi Guys n Gals,
can somebody give me the original measurements for the location of the rear tailight.ie can someone possibly measure from the bottom of the gaurd up to the bottom of the light and from the gaurd beading across to the bottom plz.
thanx

Tail lamps were moved 60mm up

according to the books....

Are you talking heart tail lights? I Have a pic for those with heaps of measurements

Yeah, A pic with heaps of measurements would be good.Would help out heaps.Thanx

Here you go, positioning for heart tail lights. I reckon getting them in the right spot has to be one of the most important things when doing a 54 or 55, they just look odd if the tail lights are too high.

Cheers
Greg

The hole measurements in the lower right didn't come out too well after the resize, its 50mm centre to centre across between the big holes, 35mm down from the centreline of the big holes to the centre of the bottom hole, 25mm up to the top one. So its 60mm from the centre of the top hole to the centre of the bottom hole.

Hope this helps

Cheers
Greg