1600 idle problems
bigdave - November 12th, 2006 at 08:18 PM
Mate has a 1600 Fasty (72 i think) with standard twin carbs and it takes about 10 mins after starting before it will idle at all. Any ideas where to
start looking? Have a new gasket set for carbys. Should this be the first thing to look at or should i be looking elsewhere first.
Any ideas
Ceers
Dave
barls - November 12th, 2006 at 08:45 PM
try the chokes to even see if they are working
bigdave - November 13th, 2006 at 07:34 PM
bump
xornge666x - November 14th, 2006 at 01:20 AM
| Quote: |
Originally
posted by barls
try the chokes to even see if they are working
|
did you try this???
would certainly be my suggestion if it idles fine after warming up! Are the choke butterflies closed when cold before startup? Are the chokes wired
up?
Sounds like they have been wound off so they are not working at all...
bigdave - November 14th, 2006 at 12:58 PM
thanks fellas
will tackle it on the week end and let u know.
Cheers
Dave