Board Logo

MSD Vs Mallory
BiX - March 13th, 2007 at 04:05 PM

The new engine has come in under budget, so I have some extra cash to upgrade the ignition (i was going to do this in 3 months time). Iam looking at a complete set (eg coil, ignition and dizzy) Down to the usual 2 MSD and Mallory. looking at getting 2 stage on both. Any good or bad experinces? or opinions on either?

I was initally looking at getting the MSD with 1 stage, as the limiter use simple resistance, and i know a few micro electronic engineers, so they could come up with some nifty luanch control or traction control if i wanted......

[ Edited on 13-3-2007 by BiX ]


Dasdubber - March 14th, 2007 at 03:23 PM

Drew, not trying to sway your decision, but if you end up going with the mallory, I have a brand new non-vac advance dizzy (Mallory) I brought in from the US but never installed....looks like I may not end up using it it, so keep it in mind.


BiX - March 14th, 2007 at 03:38 PM

Thanks for that, will keep in it mind. Got to sort out which way i go soon.

Cheers

Drew


BiX - March 15th, 2007 at 04:06 PM

Alan, U2U sent