i have to buy spark plugs 4 my 1915-16 turbo efi motor on the way 2 work i beliveve
the ones in there where ngk ???marine plugs maye a heat thing wondering wat would be the best plug for it ,note : she runs rich

I am running Beru 4 tips

I would run NGK before Bosh anyday

yeah i got new bosch because i thought the plugs needed changing and the bosch seemed worst so i cleaned them and put them back in and there better but i stuffed the thread on one so i thought id get a new set , but is there a code for them? like ie: bsa 008 and can i get them "beru,s from the likes of repco??

I got the 4 tips from V Force

Bosch W8AC or 7 for a colder plug

NGK - B6HS

Have a click and read hear

http://www.ngksparkplugs.com/ 

thanks heaps bizarre im gunna find some ngk BR6HIX

If you stuffed the thread - it's have to be the head that's stuffed wouldn't it. Time for a helicoil?

nah i tapped it finger tight with masses of grease and found it was just the start and i couldnt get it the start screwing in but when i took the tapp softly in it didnt hardly bite and she was running smooth , i put some newys in, and she roarded again oh and then i sold her to BUHSER sorry if the spelling is wrong congrats

so what now ,another baja or a lowrider????

congrats on the sale ...................should be a good basis for a project beast

ive always run bosch plugs in all my VWs and been happy with them
just tried NGK plugs in my daily driver mainstream car but they only been in 4000kms so far no complaints

To each their own

just havent been happy with non German Bosch
A couple of years ago I had a few plugs that just stopped firing.
Never had that with NGK

Had a couple Bosch 009 points that were absolute rubbish. Spring - what spring!
Mainly went electronic ignition not because of "improvement" but more that the points you buy are rubbish.

Very happy with the Beru 4 tips as well

Bosch were having their plugs made in another country,
can't remember which one
but the plugs did get a bad name because of it...

I have always run BERU....
or BOSCH...
whatever the VW shops had at the time....

plugs to suit beetles are getting harder to find at Repco etc as they don't sell many...

I find it best to buy everything from a VW shop...
200+ kms away...

cheers

Lee

PS: I may try an NGK resister plug next time...
I've been using them in My Mitsubishis for years...

hey
i priced the BR6HIX at repco today
and wow 21 bux EACH is this right??

R u running 12 or 14 mm

as the range will vary depending on the thread size ????

stock size 12
think ill stick to w8ac