Board Logo

Single side plate box length
PUNCH_BUG - February 27th, 2008 at 01:19 PM

Does anyone know, or have a single side plate bug box lying around that they can measure, to tell me the length of it?

From the face that bolts to the motor to the, end of the shaft.

Thanks.

dangerous - February 27th, 2008 at 05:31 PM

670mm
but the input shft sticks out about 10mm,
and the shift rod can move in and out 10mm or so from that point.

vw54 - February 27th, 2008 at 06:26 PM

its the same length as a stokc twin side plate or even a swing axle

what is it your wanting to do ???? swapping between years models is not a prob

PUNCH_BUG - February 27th, 2008 at 11:23 PM

Thanks dangerous, and vw54,

Im just comparing the difference in length between the single side plate and my kombi 2ltr box that has been created for my bug.

Dero - February 29th, 2008 at 04:43 AM

Hey Punch Bug... let me know if ou dont want the 2 ltr box... :P

Flintstones - February 29th, 2008 at 06:54 PM

Hey Punch Bug,

what's the length of the 2Lt box?
also what are the height differences between the 2 boxes (at the shift side) if they are both sitting on the floor?

Cheers
D

PUNCH_BUG - March 1st, 2008 at 12:25 PM

Dero, do you want the albins gears and super diff thats inside it as well? :P

Flinstones I dont have a 1600 box anymore to compare, but i will measure it up.

Dero - March 2nd, 2008 at 03:19 AM

I definatley would consider, as i too have a EJ motor for a conversion... so if you are considering getting another box I could be interested!!

Flintstones - March 2nd, 2008 at 06:03 AM

Quote:
Originally posted by PUNCH_BUG

Flinstones I dont have a 1600 box anymore to compare, but i will measure it up.


Thanks punch bug would appreciate it.
cheers