For those of you who have done this, did you clean your floor pans with a wax cleaner and then apply the dynamate directly to the floor pan? My pan is currently painted and bare, is it fine to stick it striaght on.


Has anybody had any moisture issues?

i cleaned my fire wall with wax and grease remover then just stuck it on. ive not had any moisture problems in mine and its been on for over 2 years

Yep, as long as it is clean and no major dust/dirt/debris it will be fine. It is best applied with a heat gun and wooden roller - you heat it up first, then roll it so the adhesive really bonds to the pan.
Al