Hi Guys,

I have a reground cam stamped AP3.

Does anyone know where it might have come from and what it is ground to?

I believe they are Brazil aftermarket cams.
I have dialed in an AP4 which was a very long duration but never an AP3.

Where are you?
Perhaps you can get a cam company to check it.
I use an old case and degree wheel on an old crank to see what they are,
but most cam shops can give you a printout with heaps of info.

I used to have those specs at Volksrestore,
maybe a good dub shop that does lotsa engines can help.

Thanks guys,

Ill get a dial guage.

Also im way out west in Kalgoorlie.

Newt