Hi everyone. What rims can you put on a 82 transporter. Will late 90's model wheels fit or any other brand cars mags?

thanks

mercedes.......... steelies or mags

most kombi wheels 5 blt 112 PCD
T4 are different

At present i run 17" x 7" with a 23ET


I use to run 15" x 6" 36ET

here is my 82 with the cookies

the mombi are 112 pcd with a 35 mm offset so start there and use bthis
http://www.carlsalter.com/wheel_fitments.html 

these are the merc wheels i had on my 82

I had Passat 17"s on mine.
just need to machine the centre bore a little.
It had Audi rims on it when I got it.

I have been told in the past that T4 wheels will fit as they have the same bolt pattern if you like the commercial look. i believe that many alloys now seen on kombis do not meet the load rating required for this type of car. same goes for tyre choice. i dont believe they make a low profile 17 inch light truck tyre? but i may be wrong.

I have Merc ET39's for my Bay kombi. These did NOT fit on a '89 T3 kombi.

On the front the rim + tyre hits the top of the suspension, so physically will not bolt on.
I have seen steel merc rims on T3s' though, just not sure what offset they were.
Stock T2 and T3 kombi rims are the same offset I think, and ET39's are close to stock offset. (sorry I don't have figures, but can measure if you like).
Steering and handling are better if you can stay close to stock.

quite often need to fit spacers when fitting other manufacturers/models (audi, merc, other vw) wheels on T3's due to issue mentioned above.

there is an endless supply of info on brickyard and samba regarding after market wheels for T3's