hey
i talked with an ex pro VW restorer about the panel work on my splitty. He said for the rear corner damage it is a must really to unstitch the corner
and panelbeat it while its out of the car cause it is hard metal to get right in the car?
i will try my hardest to get pictures of the corners and other panel work needed to explain it more!
cheers
rhys
Hey rhys,
I will be up in the Valla Park area from next weekend till the long weekend, for the Valla HotRod run. I am a panelbeater/spraypainter and if you like
I can give you some extra advise. I know sawtell is about half an hour away.
Cheers,
Damien.
Hey, nice to see a VeeDubber willing to go the extra mile (or 30) to help another!
My experience with the Combi is that such work will require the removal of the panel. The other option is a puller and a lot of bog, if it's
serious - don't do it! The second opinion is very valuable, though - yes, the metal in a combi is extremely thick compared to modern cars, but a
competent panelbeater can pull a lot of dents anyway (although a lot of them have retired by now.)
that'd be sweet damien!!!! just what i need right know!
its not at my house but at the panelbeaters where nothing is being done to it but i wont be here from the 1st october to 24th when you coming (sorry dont know all the long weekends and stuff!)
cheers
rhys
Hey rhys,
I will be in Valla from the 29 Sept to the 9th Oct.
what are you up to on the 30th?(monday?) anytime in bussiness hours? we could go look at her then cause thats school holidays!
cheers
rhys
Yeah should be cool.
Send me a e-mail and we can arrange it;
damien@mountains.net.au:thumb
hey
yer no worries sent you an email
cheers
rhys