Board Logo

No indicators
kombivw - April 28th, 2009 at 08:56 AM

Indicators dont work at all. Can anyone tell me how to test the relay switch?


vw54 - April 28th, 2009 at 09:00 AM

what year and model ??? check the wires first


kombivw - April 28th, 2009 at 09:06 AM

71 bug But just had a brain wave. Will use relay switch from Kombi


Euro_67 - April 28th, 2009 at 10:25 AM

Check the fuse box. Sometimes the fuses & holder oxidise. Give them a bit of a clean / rough up with some sandpaper or use some contact cleaner. My wipers and indicators often randomly stop working because of this. A quick fix is to rotate the fuse in the holder to get a better connection.


colonel mustard - April 28th, 2009 at 12:14 PM

Bulbs, fuse's, contact points, relay... ? Fun.


greedy53 - April 28th, 2009 at 12:41 PM

do the lights come on but don't flash i'd go with a fuse than work up till ya find it


Joel - April 28th, 2009 at 04:04 PM

david try the flasher out of the kombi
everything after 70 used 3 prong relays

9 times out of 10 its the relay that goes but also the hazard switches have a habit of falling apart

with the ignition on if you pull the hazard switch does the speedo idiot light come on and not flash?


kombivw - April 30th, 2009 at 03:06 PM

Clened the two prong relay terminals and indicators worked. Hazard lights do not at all and dont show on speedo idiot light either?