does anyone know if you have to change your pushrod when you install a dual master cylinder from the single circuit one.

maybe this explains why i couldnt bleed the front brakes when i installed a dual circuit master.

i have asked around but no one seems to know

no you don't......might need to adjust it to have correct "free play" tho

what condition are the front brake hoses in?

when we put the single circuit master back in we got them to bleed fine,so im assuming the hoses are fine but one of the circuits in the dual master was pooped for some reason,

how much free play at the pedal should i have???

No as long as it seats in the piston

I didnt on my Orange 65 car even the Oval push rod fits

As per Hellbug make sure you have the correct freeplay