Board Logo

rear torsion bar rubbers
vwrallycar - June 4th, 2009 at 07:45 PM

Hi, can someone let me know which inner rubber goes on each side. just bought new ones and the number has been ground off. one has one dot and the other has 2 dots, i cant remember which is which


psimitar - June 5th, 2009 at 12:34 AM

Do you mean the inner and outer rubber doughnuts for the torsion bar spring plates.

These are either smooth or nobby depending on your year of bug.


68AutoBug - June 5th, 2009 at 01:10 AM

without the part numbers this is going to be difficult...

depending on what model beetle you have too...

for IRS rear ends ;
311 511 245 Left outer and Right hand Inner
311 511 246 Left inner & Right hand Outer

check out CIP1 website for pics... may help...

LEE


vwrallycar - June 5th, 2009 at 09:21 AM

yeah IRS rear, its the inner rubber bush i need help with.
can just make out the 6 on one of them so it should be L/H inner


psimitar - June 5th, 2009 at 11:11 AM

Take a look at VW Heritage. It's a UK VW parts supplier and they have excellent exploded views of every part of a VW from karmanns to bays :)
If you look at the torsion tube you will see if you need a smooth doughnut or one with nobby bits.


matberry - June 5th, 2009 at 02:54 PM

Dots go to the top


Joel - June 5th, 2009 at 04:51 PM

IRS bushes are pretty hard to stuff up,
i havent had a swinger apart for years but i know on my Lbug that the inner bushings only go in 1 way cos of the lugs on them


vwrallycar - June 5th, 2009 at 08:07 PM

the inner bushes will fit either side. thanks to all for their help