Board Logo

Bolts and Banjo fittings Needed (M12 x 1.5mm)
Transparu - July 24th, 2009 at 01:04 PM

I am looking for second hand banjo bolts and fittings. They are M12 x 1.5mm and about 25mm long (or a little longer). I understand these were used on some early Golfs and other VWs and Audis in the fuel delivery system. They are the same dimensions (but much shorter than) those used in the Transporter/Caravelle auto transmissions to hold and service the ATF cooler.

I need them for my cooler in my Transporter (long story). Has anyone anything like this available? I need the two bolts and the two banjo fittings (preferably with 300-500mm hose still attached).

I'd be really be pleased to have any suggestions.

Thanks

Dave
(Brisbane)


grumble - July 24th, 2009 at 08:03 PM

Try your local wrecking yard,you will find that a lot of toyotas & mitsubishis use this size on their fuel filters.


Transparu - July 24th, 2009 at 08:50 PM

Quote:
Now that is VERY helpful . . thanks Grumble.

Dave

Originally posted by grumble
Try your local wrecking yard,you will find that a lot of toyotas & mitsubishis use this size on their fuel filters.