NOS 1200 german engine case... suggestions?
happyoldhippy - September 13th, 2009 at 09:35 PM
I have a genuine NOS German 1200 case and need some opinions... is it possible/wise to bore a 1200 case out to take 1600 cylinders? alternatively, If
this is not recommended, I may be interested in swapping it for a new brazilian AS21 with a 69mm crank installed well. The old case is still sitting
in its daggy old cardboard box and taking up space, but I need to make the right move for the future of my 1960 type 1. whaddyathink?
1500S - September 13th, 2009 at 10:41 PM
It was a regular thing done during the 60s! How late is the 1200 case? Has it got the cam slipper bearings? Is the case stamped with a number?
DH
PS. What area are you?
vw54 - September 14th, 2009 at 09:18 AM
i dont think u can fit the 1600 barrels into the early case and you need the crank as well
happyoldhippy - September 14th, 2009 at 09:18 AM
I'll take some photos tonight (monday) and upload. I'm in Armidale NSW
1500S - September 14th, 2009 at 09:46 AM
| Quote: |
Originally
posted by vw54
i dont think u can fit the 1600 barrels into the early case and you need the crank as well
|
They only need to be bored to suit the bigger cyls Dave. The later 60s case with the slipper bearings is always better than the earlier case without
as we all know too well. The 69mm crank also goes straight in for the 1500/1600.
I had one of the later cases during the later 60s which I converted to a type 3 1600 which gave no problems for a 6 year period and near 100,000
miles. Others we converted had the high comp 1500S pistons which also worked well.
DH
66deluxe - September 14th, 2009 at 11:11 AM
If it does not work out for you i'd love to buy it and build a 1200 engine.
Damo.
happyoldhippy - September 14th, 2009 at 09:42 PM
here are the first three photos fresh off the press. the case number is 6692 and I've included a shot, as best I can, of the cam tunnel. be
interested in comments... gary
happyoldhippy - September 14th, 2009 at 09:46 PM
three more...
1500S - September 14th, 2009 at 11:00 PM
Did you get my PM Gary??
DH
vw54 - September 15th, 2009 at 07:28 AM
looks like the late case with slipper cam bearings
volumex - September 15th, 2009 at 12:48 PM
It's an April 66 case
happyoldhippy - September 15th, 2009 at 01:48 PM
gee, this is like 'find my family'!... thanks for all the comments. I have still to make up my mind about how to best utilize this case... probably
the limited amount of available moola will determine which path I take... any offers?
1500S - September 15th, 2009 at 03:07 PM
| Quote: |
Originally
posted by happyoldhippy
gee, this is like 'find my family'!... thanks for all the comments. I have still to make up my mind about how to best utilize this case... probably
the limited amount of available moola will determine which path I take... any offers?
|
Yes 
But you gotta read your PM to see!! 
Send me your info!!
DH
vw54 - September 15th, 2009 at 04:17 PM
better of keeping the case as a 1200
sgetty - September 15th, 2009 at 05:13 PM
hey mate my bug is a 1200 and its got 1365 0r 1385 carnt remember now, these were a period upgrade not sure if available now
hey armidale im at bendemeer we are thinking of one day having a few busses i know from tammy come up also a mate from Uralla and meet at bendy pub
one day
sgetty - September 15th, 2009 at 05:14 PM
or was it 1335 maby, someone will know
happyoldhippy - July 31st, 2010 at 08:23 PM
Since the last post, I have moved to Sydney and am now definitely more inclined to sell this case. If you're interested, send me a PM for more
info... keep in mind that a Brazilian AS21 case is about a grand, so I would be looking for a tad more than that. So... if you're keen for a genuine
German case that's never been used, maybe I could help.
Brian - July 31st, 2010 at 09:21 PM
bazilian AS 21 case has not been made in the last 10 years
AS41 is still available
happyoldhippy - August 1st, 2010 at 05:40 PM
yep, that's right..... an AS41 is at least US$650.00 too, so it also would be getting close to a grand by the time it's imported.
thanks for the tip-off!
modulus - August 1st, 2010 at 05:43 PM
| Quote: |
Originally
posted by happyoldhippy
yep, that's right..... an AS41 is at least US$650.00 too, so it also would be getting close to a grand by the time it's imported.
thanks for the tip-off!
|
Ha ha! Now you're sounding more like crappyoldcapitalist than happyoldhippy....
But for sure a NOS German 1200 case will be of interest to those who want to build 36 HP challenge engines.
hth
RISKY4LIFE - August 1st, 2010 at 06:01 PM
1385 num nuts
oh we are "mate" now thats not what you called me last time
| Quote: |
Originally
posted by sgetty
hey mate my bug is a 1200 and its got 1365 0r 1385 carnt remember now, these were a period upgrade not sure if available now
hey armidale im at bendemeer we are thinking of one day having a few busses i know from tammy come up also a mate from Uralla and meet at bendy pub
one day
|
RISKY4LIFE - August 1st, 2010 at 06:08 PM
or wait was it 1316 lol (for lee)
or wait was it 1376 lol (for lee)
and yeah i live in uralla so will have to have a chat some day !
also i did here at vintage might have some 1385
p&B
Craig Torrens - August 1st, 2010 at 06:20 PM
I'm not sure its worth BIG dollars............its still just a 1200 case, and as soon as its used in a motor then its the same as any other..2nd hand
!
P.s. You may want to spray it with WD40 to help protect where the bearing shells sit from corrosion.
farkengruven - August 1st, 2010 at 06:23 PM
| Quote: |
Originally
posted by modulus
But for sure a NOS German 1200 case will be of interest to those who want to build 36 HP challenge engines.
hth
|
Its a 40hp case, not a 36hp case.
modulus - August 1st, 2010 at 06:32 PM
| Quote: |
Originally
posted by farkengruven
Its a 40hp case, not a 36hp case.
|
My bad, it's *way* too powerful.
1500S - August 2nd, 2010 at 10:45 AM
The studs look too rusty to make it a usable item! How much do you want for it's scrap value!?
DH
vassy66T1 - August 3rd, 2010 at 09:45 AM
I know "happyoldhippy" and have for about 20 years.
He is the nicest guy and a genuine enthusiast. (i.e. he really loves VW's)
Keep your amazing comedy for another audience. 
1500S - August 3rd, 2010 at 12:22 PM
| Quote: |
Originally
posted by vassy66T1
I know "happyoldhippy" and have for about 20 years.
He is the nicest guy and a genuine enthusiast. (i.e. he really loves VW's)
Keep your amazing comedy for another audience.
|
I think one of my earlier suggestions to Happyoldhippy was to bore it for 1600 pots as it's the later case with cam slippers. For a standard daily
driver where it isn't going to be flogged the case will stand up ok, especially since it's new.
If he was closer, I'd bore it for free as also I'm a bit of a VW enthusiast and have been for near 50 years and like to help other fellow Veedubbers
to enjoy without the generally associated high costs.
I think most would have read my post as "how much do you want for the case ?" so he can put that loot into an actual 1600 case if that is direction
he wanted to take!
DH
vassy66T1 - August 3rd, 2010 at 08:37 PM
Cheers 1500s
