Hi Guys

Under the bonnet I have the three way connector coming up from the heater channels.

Can someone tell me where these 6 connections go to, also, what sort of pipe / tubing is it supposed to be.

In this pic I know 1, 2 and 3 glue onto the dash and the dash vents slip into them. I presume 1 and 3 connect to the centre box (#4) by hoses.
Does 1, 2 and 3 also connect to those 3 ways from the heater channel, if so then that leaves 2 connectors left on the three ways, am I missing something.

Thanks

geez, this is taking me heaps far back lol.

Yes the 3 way connects, if the 2 x connections at 2, 1 x connection at 3 and 1 x connection at 1 connect to 4 of the 6 points on the 2 three ways,

That leaves to channels left right?

Well, those 2 connect to the metal outlet from the heater channel at the bottom of the A pillar, which i know for sure.

so, 4 at top, 2 from a pillar bottom, theres your 6

I'm going back on very far distant memory here though

ummm

No lol

Theat 3 way is already connected to the heater channel. The three way is the three spare outlets when its connected, so there is really 4 outlets on each side lol

ok 1,2,3 clip in to the vents and are not glued in position.
1 and 3 are connected to the centre piece 4 and but also to 2 by the little pipes at the bottom of 1 and 3.
this sounds right i cant check and manuals as they have been packed away and its too dark to check my bug.
ill have a look at my pics and see if i can find one.

Hi
Ok I got this pic, thats shows it easy as, but can anyone identify what that is where I drew the arrow. That accounts ofr the extra hose but I have no idea what it is. Also, anyone know where i could get that hose from.

Thanks

ok 1 and 3 are one on that drawing. 4 is 16. 2 is 38 or is it 58.