crank free play
chop-chop - August 26th, 2010 at 09:15 AM
How much free play should a crank have without the flywheel attached. Does anyone have a copy of engine torques and specs they could email me
ianfoster7@bigpond.com
cheers
FOZ
bajachris88 - August 26th, 2010 at 11:03 AM
0.07 - 0.13mm, if in excess, don't panic, larger shims are available to take up the slack... to a degree.
Stanley - August 26th, 2010 at 11:33 AM
| Quote: |
Originally
posted by chop-chop
How much free play should a crank have without the flywheel attached. Does anyone have a copy of engine torques and specs they could email me
ianfoster7@bigpond.com
cheers
FOZ
|
http://www.thesamba.com/vw/archives/info/engine_build_sheet.php
1500S - August 26th, 2010 at 09:15 PM
| Quote: |
Originally
posted by chop-chop
How much free play should a crank have without the flywheel attached. Does anyone have a copy of engine torques and specs they could email me
ianfoster7@bigpond.com
cheers
FOZ
|
To answer your question re WITHOUT the flywheel ..... HEAPS! It's whatever the axial clearance is on bearings 2 and 3 and it doesn't really
matter. It's the clearance at bearing 1 when the flywheel is assembled that does matter. That amount given by Chris above.
DH