hey guys and girls just a quick question what size turbo would you recommend for a 1916 with a 130engle cam would you recommend a t25 or something like an ihi unit

also its mainly for strip

ask hypo-vw

cheers will do i have already had a 1776cc with a GT17 on it which was not to bad but never played with a 1916 thats all

You'll need something fairly decent in size, cos that's a shitload of cam for a turbo engine.
lucky it's for drag.

i have 110s on the shelf but ordered in a 130 to see how it will get up if not go back

Agreeing with Joel here, a 130 is enormous. Still, It'll make some pretty spectacular power figures!

Could be well off here, but a t25 or t28 could be a good start?

More info on the engine, heads etc. Do you have a target HP goal?

heads will be hemied to decompress it to the max and just a slight clean up of the ports and such engine its self is a basic 1916 turbo not sure of set up have had alot of luck with blow thru but see so many done suck thru

disco potatoe