goo OR no goo
Thinker - June 5th, 2011 at 06:12 PM
push rod seals
do you use any sealer or just let the seal do the work.
matberry - June 5th, 2011 at 06:23 PM
no goo for me on the good quality silicone based seal, but polish the case and head receiving area too.
Thinker - June 5th, 2011 at 06:46 PM
| Quote: |
Originally
posted by matberry
no goo for me on the good quality silicone based seal, but polish the case and head receiving area too.
|
when yo say polish do you mean make sure that the seats are clean and smooth or do you mean polish, like with wet and dry.
matberry - June 5th, 2011 at 07:01 PM
superclean and polish with scourer, but wet and dry would be fine.
dubai - June 5th, 2011 at 07:50 PM
I clean it right out and then put a nice film of goo on it just for piece of mind and no leaks I am happy.
vwo60 - June 5th, 2011 at 09:06 PM
no sealant on the pushrod tube seals, just prep the sealing area as above, never had a leak.