Aussieveedubbers - Powered by GaiaBB

VW Head - VALVE SEAT job in adelaide

jsheppard64 - July 1st, 2011 at 05:54 PM

I was attempting to port my heads and ended up grinding one of the valve seats

is there someone around here that can grind the valve seat

and perhaps machining the head down a bit as well
------------------------------------------------------------------------------
sun changed his email address on here...

but mistakenly he hit a wrong key.. and pressed YES..

So he's locked out at present

Lee 68autobug

Bizarre - July 1st, 2011 at 07:12 PM

damn..................... obviously a different topic to what I was thinking :sniffle:

h - July 1st, 2011 at 07:38 PM

HELLO!

Aussie Dubbin - July 1st, 2011 at 11:32 PM

call peter debiasi if be can't do it he will he able to point you in the right direction. Look up debiasi motors in the white pages

Lucky Phil - July 3rd, 2011 at 08:26 PM

Sorry to rain on your parade, but Peter Debiasi closed shop several months ago.
He is still doing a bit of business around the place, though.

psimitar - July 6th, 2011 at 10:23 AM

Any cylinder head or engine recon shop can re-cut your valve seat and it'll be a 3angle jobbie too cos thats the only way the cutting heads come these days get em all done for no more than $100-150