Board Logo

Valve job for 2 litre heads
RENNWAGEN - October 25th, 2012 at 08:33 AM

I'm looking for some one to do a valve job on a pair of German 2 litre heads in Sydney ( north side preferred ). Who can you recommend.

ian.mezz - October 26th, 2012 at 11:14 AM

GOOGLE.
most engine shops should be able to do it.

psimitar - October 26th, 2012 at 11:24 PM

Look for a cylinder head reconditioners in the Yellow pages and then phone to make sure they don't mind doing aircooled heads as some do.

Nearest one to me in Brissy cost $450 for new guides, valves and studs. He said it woulda been $600 but felt guilty for such an old donk ;)

RENNWAGEN - October 31st, 2012 at 05:14 PM

Thanks Ian. I can google no problems but I was actually after a shop some one could recommend. A VW engine lives or dies by the quality of its heads. There are plenty of shops around who will do them, I'm looking for someone who does them well.

tar76 - October 31st, 2012 at 06:55 PM

Are you willing to send them interstate? If so give Matt Berry a buzz.