Board Logo

Check out my Rotary Baja bug web page
THUDKNUCKLE - August 5th, 2006 at 01:14 PM

The link below should take you to my personal web page which shows the engine conversion to an injected rotary in my 1969 Baja, along with the porting and rebuilding of the engine. Cheers guys let me know what you think.

http://groups.msn.com/GottaVW 


71EJVan - August 5th, 2006 at 07:36 PM

Great read! I had a number of rotaries in the 80s and was into my own engine rebuilds and porting. Mainly bridge port but had one peripheral port engine which was useless on the street.

Very well thought out and executed conversion.

Regards

Brendan


THUDKNUCKLE - August 5th, 2006 at 08:25 PM

Thanks for the feed back 71EJVan, the whole conversion was something new to me including rotary engines, specially rebulding them and so fourth which presesnted itself to be quiet a challenge with many sleepless nights, after all im only a young fella and still in my teens.


71EJVan - August 6th, 2006 at 07:59 PM

Mate you should do a writeup with pics and start a thread in the conversion section.

Brendan


THUDKNUCKLE - August 7th, 2006 at 10:13 PM

yeah that was the original plan but i was unable to post pics on the forum so i decided to make my own page for ppl to visit. The webpage should be updated this week again . take care

james