Board Logo

Our Auto type 3 wagon cruiser....
1916baja - January 20th, 2013 at 07:47 PM

After selling our kombi a few months back we decided to downsize a little a get a type 3, chose the wagon because of having a little girl and the bit of extra space being handy. My wife has always wanted a Notch but compromised on this one! Long term plans are a full resto but for now its just getting lowered, some decent rims ( eventually ) Maybe brm's... and a solid reliable engine. The car is completely original which is why we bought it, I have had plenty of vw's that 100 other people have had a crack at painting, mechanical and electrical work and i'm over it! An unmolesterd original is what we wanted! It has very little to no rust what so ever, all original paint apart from a few minor touch ups here and there, orignal everything except the motor! A few yobbos have had a crack at it and really messed things up! So first up it was off to dave for some mechanical love.... Here are some pics...

Sorry for the poor quality.

When we first got it.


1916baja - January 20th, 2013 at 07:51 PM

Dave totally impressed with the task at hand! :lol::lol::lol:

We found the cam end plug was slowly getting worn away by the flex plate due to incorrect fitting of the end plug and bad end float.


1916baja - January 20th, 2013 at 07:53 PM

Sandblasted all the tinware and painted it Satin black... Gotta look fresh!


1916baja - January 20th, 2013 at 07:56 PM

While deciding what the hell we were gonna do with this dodgy engine we lowered it... 2 splines front and 1 spline rear. Its sitting even lower today as the suspension has settled overnight. There is still no engine in the back so it should bring it down nice and level when that goes in.


1916baja - January 20th, 2013 at 08:03 PM

And here is what we did today, We managed to get ahold of another engine with rooted heads, No problem because my original motor had fairly new mexican heads, bottom end was good and we thought the pistons and barrels were good to until dave scraped a bunch of carbon of the top of 1 piston and found it to be dished! WTF! right... 3 flat tops and 1 dished?? i dunno... anyway because of our location (Daves old mans shed) John just happened to have a few second hand 1641cc piston and barrel kits laying around so we found the best one and used it... So here we have the freshend 1641cc longblock. Ove the next week or so we'll have it all back together and in the car hopefully ready for dubs by the abbey!


Notchbacktastic - January 25th, 2013 at 08:37 PM

MMmmm nice clean Mustard...


dragsters for life - January 26th, 2013 at 07:27 AM

nice


1916baja - January 26th, 2013 at 07:47 AM

Finished knocking up this little sucker for it yesterday! But when we put it in the car it has totally locked up for some reason?? We cant even turn it over to get the torque converter/flex plate bolts done up... :grind: any ideas?? I dunno about this auto type 3 thing, i think i should have stuck to beetles and kombis!


whathaveidone - January 26th, 2013 at 07:51 AM

Maybe something to do with the guy who put the pistons in!!!!!:lol::lol::lol::lol::lol::lol:


1916baja - January 26th, 2013 at 08:07 AM

Quote:
Originally posted by whathaveidone
Maybe something to do with the guy who put the pistons in!!!!!:lol::lol::lol::lol::lol::lol:


Definatly not a piston problem! :lol: It turned over fine until we put it in the car! daves thinking the torque converter wasnt in all the way...? Because its been sitting there for months people have been pushing it around, in and out of the shed all with the converter just sitting there...

An Ben, i'm pretty sure its your fault! I dunno why but it is :lol:


whathaveidone - January 26th, 2013 at 03:59 PM

Like a :ninja:!!!!!
Punked you from 100ks away:lol::lol::lol::lol::lol:


1916baja - January 27th, 2013 at 12:01 AM

:lol::lol::lol::lol::lol: come up and fix it will ya! We're over it. We're gonna stick to race cars that are clean with shiny new parts from now on!!


newghia - January 27th, 2013 at 06:22 AM

Have you checked the fluid in the auto ?
It may be locked up & causing the resistance , just a thought
Nath


1916baja - January 27th, 2013 at 08:16 AM

I don't think it's a fluid issue, it's bound up on something... Stuck solid! I will check it out though.


whathaveidone - January 27th, 2013 at 09:50 AM

what about the flux capacitor?????


1916baja - January 27th, 2013 at 12:16 PM

Probably... Those things are always a bit flakey!


1916baja - January 27th, 2013 at 12:17 PM

But that shouldn't really matter untill I hit 88 mph...


newghia - January 27th, 2013 at 04:06 PM

Does it roll / move when pushed ?


1916baja - January 27th, 2013 at 04:37 PM

I dunno, we haven't tried to move it...


Sandy - January 28th, 2013 at 01:23 PM

Torque converter not home - seen it before


1916baja - January 28th, 2013 at 05:25 PM

We found it, it seems just that... The input shaft and pump shaft weren't home and the spigot in the converter were all blurred up. Waiting in a new seal for the gearbox and well have it all back in. Thanks for the advice today Aaron!


1916baja - February 17th, 2013 at 02:57 PM

home at last! The big push to get it to dubs by the abbey was a success but unfortunatly no abbey! Dave finished off the last of it yesterday morning... Seems to be running sweet, drives smooth and looks cool! Just gotta fork out for some new wheels sooner or later, maybe brms or sprintstars?? i dunno, we are just gonna drive it for a while.


SebastienPeek - February 17th, 2013 at 03:00 PM

This is a beautiful example of Type 3 square. Love it.

Wish I could get a late automatic that just needed an engine and a drop, that would be awesome.


1916baja - February 17th, 2013 at 03:04 PM

Cheers mate! I was kinda hoping it didnt need the engine part but oh well, its done now!


SebastienPeek - February 17th, 2013 at 03:08 PM

Aha yeah, understandably!

Would love to pick up one that I could just drive around as a daily. But, need to finish one project first before starting the next!


1916baja - April 6th, 2013 at 12:18 AM

New bling!


nbturbo - April 6th, 2013 at 09:26 AM

Very nice- good purchase.


matberry - April 6th, 2013 at 09:42 AM

Good choice of bling Mick. :tu:


Doug Sweetman - April 6th, 2013 at 10:09 AM

Looks the shiz, top stuff. Not much cooler to cruise in than an auto type 3 wagon


1916baja - April 7th, 2013 at 07:59 PM

Cheers guys! I'm stoked... They scrub at full lock just a little :lol: but only due to the fact the wheel arch Is pushed in a little...