Board Logo

my 67 dual cab
_dmb_ - June 13th, 2004 at 03:40 PM

before


_dmb_ - June 13th, 2004 at 03:41 PM

during


_dmb_ - June 13th, 2004 at 03:44 PM

during


twoguns - June 13th, 2004 at 05:23 PM

where about are you on the coast?


_dmb_ - June 14th, 2004 at 03:57 PM

after having owned it for 6 years and not even started working on it i thought i would have all the bodywork/paint done for me. much easier this way, but not cheap. front end is ball joint adjustable (indian), rear is irs (muller). don't have any gates as yet, so will just put timber ones on for now. looking forward to gettng it home so i can start playing.

[Edited on 5/4/2005 by kombidog]


_dmb_ - June 14th, 2004 at 03:58 PM

another


_dmb_ - June 14th, 2004 at 03:59 PM

another


_dmb_ - June 14th, 2004 at 04:00 PM

more


_dmb_ - June 14th, 2004 at 04:03 PM

as with most split restos, the bottom six-twelve inches, cab floor and tray have basically been replaced. it will have mercedes benz fuel tank (60L). want to run wide 5 bolt wheels so will need to get adapters or something.


BenettonVW - June 14th, 2004 at 04:12 PM

Looking the goods.. Is your goal your avatar?


twoguns - June 14th, 2004 at 04:49 PM

ah haa. she remembers you. whre is it getting work done and painting?. maybe u2u me. as mine is in at similiar stage to yours. could be good to swap info and contacts...


72TWINCAB - June 15th, 2004 at 02:49 PM

DROOOOOOOL. My dream VW is a split twin cab. Looking forward to your progress picts.


frenzix - December 5th, 2004 at 06:08 PM

hey, i demand an update!


byronbus - December 5th, 2004 at 08:28 PM

i saw it not long ago, looking sweet


_dmb_ - December 5th, 2004 at 09:10 PM

hey bruce, hows it looking? i haven't seen it myself for a while. last i saw was mostly in high fill, underneath the whole car & engine bay & fuel tank area & floor in cab front and rear is all done in por15, tray still off, but slowly getting there.


byronbus - December 6th, 2004 at 07:38 AM

looking sweet mate, old mate certainly has put some time into it...He fixed a splitty bumper for me sometime back, did a good job...