Board Logo

Kuch's Type 3 Square
Kuchster - May 13th, 2011 at 10:32 PM

This is how I bought it
http://www.kuch.com.au/rob/type3/IMG_0708.jpg

http://www.kuch.com.au/rob/type3/IMGP1607.JPG

http://www.kuch.com.au/rob/type3/IMGP1603.JPG

Then the work started
http://www.kuch.com.au/rob/type3/IMG_0041.jpg

http://www.kuch.com.au/rob/type3/IMG_0052.jpg

http://www.kuch.com.au/rob/type3/IMG_0054.jpg

http://www.kuch.com.au/rob/type3/IMG_0058.jpg

http://www.kuch.com.au/rob/type3/IMG_0060.jpg

http://www.kuch.com.au/rob/type3/IMG_0064.jpg

http://www.kuch.com.au/rob/type3/IMG_0072.jpg

http://www.kuch.com.au/rob/type3/IMG_0082.jpg

http://www.kuch.com.au/rob/type3/IMG_0083.jpg

http://www.kuch.com.au/rob/type3/IMG_0088.jpg

This is what it looked like before it was cut open
http://www.kuch.com.au/rob/type3/IMG_0091.jpg

This is how much rust was hidden inside
http://www.kuch.com.au/rob/type3/IMG_0096.jpg

http://www.kuch.com.au/rob/type3/IMG_0126.jpg

http://www.kuch.com.au/rob/type3/IMG_0130.jpg

http://www.kuch.com.au/rob/type3/IMG_0132.jpg

http://www.kuch.com.au/rob/type3/IMG_0134.jpg

http://www.kuch.com.au/rob/type3/IMG_0136.jpg

http://www.kuch.com.au/rob/type3/IMG_0137.jpg

http://www.kuch.com.au/rob/type3/IMG_0139.jpg

http://www.kuch.com.au/rob/type3/IMG_0145.jpg

http://www.kuch.com.au/rob/type3/IMG_0148.jpg

http://www.kuch.com.au/rob/type3/IMG_0151.jpg

http://www.kuch.com.au/rob/type3/IMG_0154.jpg

http://www.kuch.com.au/rob/type3/IMG_0155.jpg

http://www.kuch.com.au/rob/type3/IMG_0157.jpg

http://www.kuch.com.au/rob/type3/IMG_0158.jpg

http://www.kuch.com.au/rob/type3/IMG_0162.jpg

http://www.kuch.com.au/rob/type3/IMG_0217.jpg

http://www.kuch.com.au/rob/type3/IMG_0219.jpg

Before and after pressure washing the car
http://www.kuch.com.au/rob/type3/IMG_0248.jpg

http://www.kuch.com.au/rob/type3/IMG_0249.jpg

http://www.kuch.com.au/rob/type3/IMG_0250.jpg

http://www.kuch.com.au/rob/type3/IMG_0251.jpg

http://www.kuch.com.au/rob/type3/IMG_0254.jpg

http://www.kuch.com.au/rob/type3/IMG_0256.jpg

http://www.kuch.com.au/rob/type3/IMG_0257.jpg

http://www.kuch.com.au/rob/type3/IMG_0258.jpg

http://www.kuch.com.au/rob/type3/IMG_0260.jpg

http://www.kuch.com.au/rob/type3/IMG_0261.jpg

http://www.kuch.com.au/rob/type3/IMG_0263.jpg

http://www.kuch.com.au/rob/type3/IMG_0266.jpg

http://www.kuch.com.au/rob/type3/IMG_0271.jpg

http://www.kuch.com.au/rob/type3/IMG_0272.jpg
A bit more has been done and i'll update pictures soon.
Cheers

cam070 - May 13th, 2011 at 10:48 PM

You certainly have a challenge on your hands, but looks like your kicking it's ass. Keep the pics coming as I'm sure you will inspire many of us

TICK - May 14th, 2011 at 05:38 AM

nice work robert,

mactaylor - May 14th, 2011 at 08:36 AM

saving one A/C vw at a time!

LUFTMEISTER - May 14th, 2011 at 09:16 AM

Nice bit of old skool oxy work there.:yes: Keep it up :tu:

annosL - May 15th, 2011 at 12:20 AM

Hear Hear! I second that, excellent skills with Oxy torch, well done and thanks for the pics Robert,

Kuchster - May 15th, 2011 at 08:04 PM

All primed
http://www.kuch.com.au/rob/type3/IMG_0277.jpg

http://www.kuch.com.au/rob/type3/IMG_0278.jpg

http://www.kuch.com.au/rob/type3/IMG_0279.jpg

http://www.kuch.com.au/rob/type3/IMG_0280.jpg

http://www.kuch.com.au/rob/type3/IMG_0281.jpg

http://www.kuch.com.au/rob/type3/IMG_0283.jpg

http://www.kuch.com.au/rob/type3/IMG_0284.jpg

http://www.kuch.com.au/rob/type3/IMG_0285.jpg

http://www.kuch.com.au/rob/type3/IMG_0286.jpg

http://www.kuch.com.au/rob/type3/IMG_0287.jpg

Just finished this one
http://www.kuch.com.au/rob/type3/IMG_0288.jpg

Previous repair that rusted up a bit, used a mig on this one
http://www.kuch.com.au/rob/type3/IMG_0290.jpg

http://www.kuch.com.au/rob/type3/IMG_0293.jpg

http://www.kuch.com.au/rob/type3/IMG_0294.jpg

Still needs the holes drilled in but otherwise finished
http://www.kuch.com.au/rob/type3/IMG_0296.jpg