Board Logo

On yo scale of one to bad how worried should I be?
Ollie - June 23rd, 2014 at 12:44 PM

Hey guys

Hadn't driven by bug in a while and giving it a decent dressing down I noticed a few (what I think are) rusty bubbles popping up!

Is there anything I can do to slow this down? And am I stuffed already? I don't exactly have the funds right now to strip it back and repaint etc!

Cheers,

Ollie


http://i1119.photobucket.com/albums/k627/OMClarke/Mobile%20Uploads/45D7E41E-1FAF-49CF-BEFB-66CAD6398355_zpsdvmwmqw0.jpg

http://i1119.photobucket.com/albums/k627/OMClarke/Mobile%20Uploads/2014-06/A211B096-9D5F-4298-97BA-862FCE1628E2_zpsgtdmlxm0.jpg

http://i1119.photobucket.com/albums/k627/OMClarke/Mobile%20Uploads/AEDE9F52-0CC7-4338-A30D-AFEEAB09BAB9_zpsdddffehj.jpg

http://i1119.photobucket.com/albums/k627/OMClarke/Mobile%20Uploads/92440658-E157-476A-9BF4-F3515A595110_zpsvlglanwe.jpg


kombibob - June 23rd, 2014 at 01:44 PM

Bad prep under paint!
Yeah you should be worried.
If you don't have any cash atm your best bet would be to get a colour match of your paint in a can and grind out the affected areas, repair, treat and paint.
Won't be perfect but will help to keep it at bay until you can afford to do it properly.


matberry - June 23rd, 2014 at 02:43 PM

Yep, it will only get worse unfortunately, and will no doubt be in more areas. Bob's right, bad or nil prep is the cause :(


shokwave2 - June 23rd, 2014 at 04:36 PM

I had bubbles in the exact same spot on the side of my bonnet. They had been there for a while, slowly growing. So i decided to sand back the paint and found a big hollow hole fille with bog from the previous owner/repairer. I removed all the bog and filled with metal filler for now. I'll take a pic if you like to show you the extent. But as others have said, it wont look good under there.


Flintstones - June 23rd, 2014 at 05:21 PM

What you see is only a portion of what it's like underneath the paint.
Start saving especially for the body cause if its your daily, it won't pass rego unfortunately......

If you can find a solid body, get that prepped and painted, then swap it for the rusty body.


nils - June 23rd, 2014 at 09:05 PM

Bummer man


helbus - June 23rd, 2014 at 09:06 PM

It is like it is because the metal is all gone underneath, right through. The section of metal has to be cut out and replaced and then protected.


Bizarre - June 23rd, 2014 at 09:27 PM

on the up side - the worst of it is in the bonnet

Get yourself a new bonnet and paint it matt black.
Sort of matches everything

The rest of it seems to be in the gutters
I cant see a fold line - meaning it has had repairs before that have been finished off with a wipe of bog

Maybe taking the headlining out and putting lanolin in the channel from the inside would help slow it??


Ollie - June 23rd, 2014 at 09:33 PM

I'm not super fussed about the bonnet, as I can get another one or what not haha

Anyone have any idea how pricey it is to get the gutters looked at?

Also a decent place?