Dave

My boss liked the shine so much on my Audi that he wants me to do his L/Cruiser.
It's white, so what would you suggest I do with the systems
that I've already purchased off you?

Ta Craig

Hi Craig,

It depends on his usage of the vehicle to a certain degree.

If it is used around town and garaged all the time I would start by claying it, then use P21S products, he would need to except that he will need to rewax every 6 weeks or so and clay and polish every 6 months to maintain a great gloss and shine. P21S is great on white and silver.

If he uses the vehicle for more arduos tasks, I would suggest claying, followed by Klasse or Wolfgang products. The shine will still be great but not as warm and deep as it will be with P21S. Durability will be much better, approx 6 months before anything needs re-applying.

HTH.

Cheers
Dave.

Hi Dave

What if I Klassed AI1 and then glazed, or AI1 and P21s'd?!
Maybe I should go the whole hog! Trouble is it's not German so I'm not so enthusiastic about doin it! :cussing

Craig

Hi Craig,

Sorry for the delay with this answer however I have been interstate for a couple of days.

Yes you can mix and match products such as AIO & P21S no problem. The main point to remember is Polymer products such as Wolfgang & Klasse will give more durability than the natural Carnuaba products such as Pinnacle & P21S.

Due to size of a Cruiser I would use Klasse or Wolfgang so it doesnt need doing so often !!!

Cheers
Dave.

Pitty it isn't a Touareg!!!