Board Logo

The $50 splitty gets Axed
VolksFolks - April 13th, 2005 at 05:13 PM

Hey, Some time age i posted a thread about a Splitty i got for $50 from a tip, it was red rotten in places so became a donor,

To show all the salvagable parts do not go to waste,

the gearbox, red hubs axels rear brakes were used and now on the road on another car,

the cables and heaps of other stuff was used on a differnt car,

and today we cut the old girls nose off, remarkebly the cabin floor is sound like new, quite unbilivable rearly, to be grafted in the PMG soon, here are some pics of the removal,

PLEASE NOTE MAY UPSET SOME VEIWERS




Rolled her over

http://www.users.on.net/~volksfolks/High%20Top/50buck1.JPG

Me cutting the chassis

http://www.users.on.net/~volksfolks/High%20Top/50buck.JPG

http://www.users.on.net/~volksfolks/High%20Top/50buck2.JPG

The rough floor section, now i can get it on the bench and unpick it, wheres that dremmel TIMMY!!!!

http://www.users.on.net/~volksfolks/High%20Top/50buck3.JPG

http://www.users.on.net/~volksfolks/High%20Top/50buck4.JPG

Go the drivable trailer

Andy

[Edited on 13/4/2005 by VolksFolks]


VWFREAK - April 13th, 2005 at 05:20 PM

Nice one


nicko - April 13th, 2005 at 05:58 PM

I were wondering if you want to part with the section of B pillar that supports the top hinge of the front carge door. Basically the section from the trim line to just below the roof line.
Cheers Nicko


VolksFolks - April 13th, 2005 at 06:07 PM

Hey Nick, I dont know the condition of that area and i will not be down the shed for another month or so, but you can have it for sure if its any good, will cost you a cutting disc and a beer, will keep in touch

Andy

[Edited on 13/4/2005 by VolksFolks]


VolksFolks - April 13th, 2005 at 06:14 PM

Sorry mate has been butchered big time, Roy sells newbies for a reasonable price..

or I have a mate who has some still in cars, if you want his nimber u2u me

Andy

[Edited on 13/4/2005 by VolksFolks]


nicko - April 13th, 2005 at 06:18 PM

Thanks Andy I will try and get a pict of exactly what I want. Nicko


VolksFolks - April 13th, 2005 at 06:19 PM

Quote:
Originally posted by nicko
Thanks Andy I will try and get a pict of exactly what I want. Nicko


Thats a good idea dude, then i will know exactly what you need...