Hi There,

I have a 55 Beetle and want to install bullet blinkers for further safety, the semaphores just aren't being seen and I keep getting horns beeped at me and people telling me I haven't indicatored!

If anyone has any instructions on how to install them or can recommend an auto electrician in the Brisbane/South brisbane area, that would be reat.

Kind regards

I cant help re the bullets sorry, but can you fit LED bulbs in the semaphores to make it more visible.

Kev

I fitted as set to my 60 model, i bought them from ESI parts, the bullet indicators complete, Left hand side, http://www.eisparts.com/111953041C.html  x 1 Right hand side, http://www.eisparts.com/111953042C.html  x 1
You will also require two backing plates,
http://www.eisparts.com/111953163.html  x 2
Total price for all the parts are $139 US.
I fitted them buy cutting the correct size hole in the mudguard in the right location so the weld plate fits in from behind, then i just used the large nut on the bulb holder to clamp them in place, it is not really a auto elections job to fit them as the wiring is only a small part, getting them to look and fit right takes time.

hey
No need to drill holes
Put em on some brackets att to the bumper brackets as I've done on my 54 beetle
See link for ideas
Not difficult to do n u are not hurting the ride
cheers pauly

http://forums.aussieveedubbers.com/viewtopic.php?tid=35360 

The factory indicators are in keeping with the car

yes in keeping sorta maybe
It looks good
but imao drilled holes that were not there in the beginning should not be there
Maybe it's the purist in me but many will agree n disagree
each to there own
cheers