FWIW, I did my own wiring for an EJ22 into an '82 Transporter.

I did it ONLY after I had bought some instructions and a detailed wiring layout from Hobert Kennedy in California.

Kennedy Engineered Products have been adapting engines for 35 years and they specialise in Subaru-VW, but also other engines to VW. They make some very useful parts, and it is VERY well worth spending $3 to obtain their full catalogue. It is full of information/ideas.

The wiring information cost USD20, from memory and was excellent value. Armed with this, some talcum powder, a blade, side-cutters, an old door and a few other items, I had no trouble at all in doing the wiring.

I also bought their air intake designed specifically to allow an EJ22 to fit into the aircooled Transporters. (This is tricky, and different for later wasserleaker conversions.)

I would highly recommend KEP for information, and especially for their catalogue. They are very speedy in dispatching goods.

KENNEDY ENGINEERED PRODUCTS
38830 17th St. East, Palmdale, California 93550

http://www.kennedyeng.com/ 
email: kennedy@antelecom.net

Phone# (661) 272-1147
FAX # (661) 272-1575

They will accept Australian Credit Card orders by phone, email or fax.

There IS a copy of the KEP catalog online at:
http://www.tomcullen.org/Vehicles/Vanagon/KEP_documents/KEP_flyer.htm 
BUT scroll to the bottom of the page and ignore the pics if you can!

For those who don't know, there is a Yahoo egroup (subaruvanagon) devoted specially to Subarus into Transporters/Vanagons. It has over 1360 members and over 15,000 message posted. There is a LARGE files section covering all manner of issues.

Dave

[Edited on 20-4-04 by Transparu]