Board Logo

rear brakes
tonyg - May 25th, 2004 at 09:32 AM

Has anyone on the forum had experience of modifying falcon discs to fit rear of T3? I heard that someone had modified them to fit a bay and need to know about a 'how to'. (I am aware there are kits from Custom Off Road and others but too expensive for me at this time).

seagull - May 26th, 2004 at 01:08 AM

yep do it your self go back a few pages in the tech or how too seagull

[Edited on 29-5-2004 by seagull]

Jeza - May 27th, 2004 at 03:26 PM

Jak did a how to under racers edge on an IRS bug,
http://www.aussieveedubbers.com/forum/viewthread.php?tid=19319 

And check out Bajawes' site as well.

Cheers
Jeremy

seagull - May 29th, 2004 at 11:32 PM

bump

[Edited on 29-5-2004 by seagull]

Jenny - June 1st, 2004 at 12:37 PM

You might as well convert over to Ford stud pattern while you're at it.
http://www.aussieveedubbers.com/forum/viewthread.php?tid=18354  :)

Brad - June 2nd, 2004 at 08:50 PM

mmm by T3 I am guessing you mean Wedge as in T3 Van with the Y bar rear trailing arms yeah ??

If so it isn't as easy as the Bug IRS stuff. Still doable but a little harder from what I have been told.

I know that doesn't help but it may clarify what you are asking for someone out there who does know.

tonyg - June 4th, 2004 at 08:03 AM

Thanks Brad et al; will investigate further when i get time...

humpty - June 4th, 2004 at 04:30 PM

I'm looking at this too Tony.....The SVX is finally getting a little attention!
Though big brakes for the front come first!.....
Have you done yours?
Any idea what DBA has as far as vented front disc's for T25/3's?

MikeM - June 4th, 2004 at 04:38 PM

http://www.dba.com.au/dba_catalogue_2004/HTML/Standardseries/standard_index.htm