Board Logo

subaru to vw drive adapter !
seagull - April 9th, 2005 at 11:34 PM

seagull - April 9th, 2005 at 11:38 PM

This is the drive peice I made for my subaru conversion

I have not drilled the holes in the as this one was my test peice ,
It worked so I machined one from 4140 is all sweet .

The fly wheel or flex plate bots on the same as a vw you use the subaru bolts to bolt the adapter up then bolt your fly wheel on .

I hope this helps

helterskelter400 - April 9th, 2005 at 11:39 PM

thaks seagull.

but because i'm a fool please expain which side attaches to the sooby output and how does the vw flywheel fit to allow the vw trans splines to sliide in. does the thickness of the adapter plate have to relate to the width of this adapter???

helterskelter400 - April 9th, 2005 at 11:40 PM

oops. you too fast for me. thanks

seagull - April 9th, 2005 at 11:42 PM

just come over one day and I show you , dont for get the :beer
yes the drive adapter has a relation ship with the drive hub correct

seagull - April 9th, 2005 at 11:48 PM

give you some idea

68AutoBug - April 10th, 2005 at 02:00 AM

Excellent work Neil..

Lee

boof2332 - April 10th, 2005 at 08:47 AM

I wish I had a lathe...and the ability to do that.

Matt

type2nut - April 10th, 2005 at 11:10 AM

Damned nice piece of work.
You should be well proud of that Neil.

seagull - April 10th, 2005 at 11:39 PM

Thanks guys , having a trade helps

Desert Moose - April 10th, 2005 at 11:52 PM

Quote:
Originally posted by seagull
Thanks guys , having a trade helps



what a carpenter or was that a plumber...........lol:P

sorry just jokes........ nice one Neil:thumb

[Edited on 10/4/2005 by Desert Moose]

seagull - April 11th, 2005 at 12:35 AM

:P

Doug Sweetman - April 11th, 2005 at 10:23 AM

Just add another to the list of 'Interesting things you will find in Neil's shed' ;)