Board Logo

part of the heater or not?
72RSbug - May 22nd, 2005 at 06:28 PM

http://memimage.cardomain.net/member_images/4/web/844000-844999/844382_23_full.jpg

I assume these 2 black hoses on my EJ20 TT are part of the Subaru Legacy's heater and can simply be pulled of and plugged but I'd like to be 100% sure first.

ricola - May 22nd, 2005 at 08:01 PM

I think they are heater hoses but you must not plug them. If you don't want to use a heater just join them together. The heater loop is part of the thermostat circuit. The single turbo heater pipes come out to one side but I guess your second turbo would be in the way!

Where did you get your adapter kit from and how much? I'll be needing one shortly and will source from Europe, was thinking DS Tuning...

Rich

[Edited on 22/5/2005 by ricola]

seagull - May 22nd, 2005 at 10:29 PM

that adapter looks just like mine

72RSbug - May 22nd, 2005 at 11:16 PM

I assume the adaptor came from KEP, at least that's where the clutch came from. I bought the engine including the cluth+adaptor plate as a package deal from someone in the US.
Thanks for the advice on the hoses, I will join the 2 together then.