Board Logo

eJ22 lib 92 ECU wiring Diag wanted
vwpete - March 29th, 2006 at 03:10 PM

Ok for some unknown reason I am gonna try and cut down the wring loom my self. (prob cos I is cheap, but more cos I want to know want all these bits of copper do)

I have had a good hunt in this forum and on the web and it seems I can get wiring diags for everything but this ECU.

Anyone reckon they got a diag for this one? Cheers 4 any info!

Pics of ECU below

[ Edited on 29/3/2006 by vwpete ]

Transparu - March 29th, 2006 at 05:58 PM

I reckon the best thing is to spend about $30US and buy the instructions from Kennedy Engineered Products in the US. ALternatively, go to the files section and find most of what you need at:

http://autos.groups.yahoo.com/group/subaruvanagon/messages/ 
LOADS of help there . . become a member !

dave

lexm - March 29th, 2006 at 07:49 PM

you have u2u

seagull - March 30th, 2006 at 01:18 AM

the one I gave you is no good ?

vwpete - March 30th, 2006 at 03:02 PM

Nah seagull wire colours dont match up

I will give ya a call later

Oh and lexm, Cheers for the diags 2day i will check it out 2night and see if it matchs up

klashniv - April 12th, 2006 at 10:44 PM

is there a site where these are available?

vwpete, did you ever get what you were looking for?

[ Edited on 12-4-2006 by klashniv ]

oval57 - April 24th, 2006 at 11:04 PM

Are you still looking for the wiring diagram? Can be contacted on chico25@optusnet.com.au
Just finished putting mine together and it is working!
Joe

klashniv - April 25th, 2006 at 02:49 PM

oval57, you have U2U

lexm - April 25th, 2006 at 10:10 PM

Should be this one I think.
http://www.ch601.org/engines/files/SubaruEJ22-ServiceManual-1.zip 
http://www.ch601.org/engines/files/SubaruEJ22-ServiceManual-2.zip