Board Logo

porsche to vw
mangrovejack - September 29th, 2006 at 08:35 PM

does anyone know if there is an adaptor plate to suit porsche 911 to vw kombi?


klashniv - September 29th, 2006 at 09:12 PM

don't know about 911 in particulr but am sure these guys will know

http://www.kennedyeng.com/vw_por.htm 


empi - September 29th, 2006 at 10:14 PM

type 4 bell housing with prefix Z10 should bolt straight up.


1303Steve - September 29th, 2006 at 10:53 PM

Hi

The bolts and the bellhousing size are the same as any air cooled VW and WBX, its the clutch that can be a pain.

Steve