Aussieveedubbers - Powered by GaiaBB

subaru wiring

rocknrob - February 21st, 2007 at 10:48 AM

Hi can anybody tell me where that smaller connector in the middle goes?

mackaymanx - February 21st, 2007 at 10:54 AM

aircon?

rocknrob - February 21st, 2007 at 11:08 AM

nahhh checked all the aircon connections...thanks anyway...anybody else?

gull - February 21st, 2007 at 01:43 PM

The loom in your hand is a 3 pug unit , so the motor loom must be a 3 plug as well .Have you removed the air con form this motor ? is the motor & loom from the same car / cut ?

did it have ABS ??? EBT ??

gull - February 21st, 2007 at 01:45 PM

It looks like the earthing ( kit ) wires to me
top shot of motor ?

rocknrob - February 21st, 2007 at 03:23 PM

Quote:

Originally posted by gull
It looks like the earthing ( kit ) wires to me
top shot of motor ?

Yeah you may be right...trying to figure the wiring diagram....this is what you get when you leave a project for a couple of months(and travel to central australia)

Yes i had the whole car to start with a i took some pics but not enough:cry

lexm - February 21st, 2007 at 07:24 PM

U2U sent

Brad - February 21st, 2007 at 07:46 PM

If you pulled it out then it should plug in no issues at all.

The plug you have empty usually goes into the engine loom along with the other two.

In short there should be another plug floating around which has not yet been joined.

rocknrob - March 1st, 2007 at 09:55 AM

Hi All, I still can't figure this connection...does anybody within a couple of hours drive of the gold coast have a similar engine i can have a look at? I must have lost a connector somehow. :grind:

Brad - March 1st, 2007 at 01:40 PM

Hi,

Funnily enough I do ....

If you want to drop up to the Shop in Stafford I have a 3 Plug EJ 22 in a Brumby and also have at least 1 sitting on the shelf. If you bring your ECU I can show you what goes where.

28 Hayward St, STAFFORD

rocknrob - March 1st, 2007 at 03:37 PM

You are a godsend..see you soon:kiss