Board Logo

what is this part, identify??
supa74 - January 17th, 2008 at 09:16 AM

i have a ej20h / aka twin turbo engine. jdm. the green thing that screws into the top of the intake manifold got busted, i unscrewed it and it sucks n blows both ways. anybody know the part number or what the heck this part is so i can order it?? the hose that goes in the top leads to the solenoid box, i do know that much. any help i'd appreciate it. cheers

http://i99.photobucket.com/albums/l301/airwerx/SubieTech/Picturesss033.jpg

http://i99.photobucket.com/albums/l301/airwerx/SubieTech/Picturesss034.jpg

JVLRacing - January 17th, 2008 at 09:12 PM

Looks like a air control valve! Is it still a twin turbo?.or going back to single turbo?

supa74 - January 18th, 2008 at 07:12 AM

twin , going k eep it twins. your right its a one way vacuum valve that somebody said only recognized vacuum and not positive pressure. dont know where to buy another one at, think i still got the top piece saved, so might figure out how glue it back.. :tu:

seagull - February 1st, 2008 at 12:10 AM

are the injectors grey or yellow on this motor ?

supa74 - March 5th, 2008 at 02:35 PM

Seagull, i think they are gray i will double check in the next day or so but im pretty sure they are gray.

seagull - March 7th, 2008 at 12:42 AM

Thats a legacy motor then

supa74 - March 10th, 2008 at 03:49 AM

yep it is gray injectors n it is a legacy engine but im stumped to what that little green valve is for, seems nobody knows. it blows n sucks both ways. im studin the diagrams so im sure i'll find out..

The Bigfella - March 10th, 2008 at 10:04 AM

I've busted one of those things before (can't help with what it is) and successfully gooped it up with some blue silicon. (I don't normally admit to these sort of things....)

72RSbug - March 19th, 2008 at 03:08 AM

I heard that is the vacume line for the factory fuel regulator but have no idea if that information is correct.