Been looking through some of the set-ups alot of the focus is on cooling (granted) but I wanted to know how people are routing their exhausts, especially in a bug as I would love to change the 1300 for a subi motor

Hi

I saved these photos on my hard drive of Paul 1303s Subi exhaust.

Steve

turbo or N/A?

im going thro all this crap atm
ive come to the conclusion im gonna have to build my own system up cos altho theres plenty of nice staino headers on the market at good prices to there designed for subarus so the ground clearance sux in a bug cos the engine sits alot lower

yeah i wanted clearance too so i found some old water pipe down the backyard and welded it together...now the sump needs doing...


[img][/img]

arent you running a cat rob?

nice ground clearance you have
with a stock subi sump in my bug at the ride height its at at the moment the sump will have about 1.5" clearance

yup no fat chicks in my fat chick

no cat Joel...42mm equal length primaries...no power steering and no aircon...its insane the way this thing revs...



[img][/img]


of course it won't hurt to have a little help...



[img][/img]

[img][/img]

Ah, a man after my own heart

be interested to see how it goes for you as i had that exact same project in mind

i thought of chucking one of my blowers on but it seems space restrictions wont allow in a bug

if you are putting an EJ22 into a bug better not use the stock headers...they hang even lower than the sump



[img][/img]

yea i know what you mean
looks like i get to build one from scratch to suit

hey Joel.. or anyone else building a suby exhaust...i can send cad drawings for exhaust flanges and TD04 turbo flange for laser or waterjet cutting



[img][/img]

can also send the cad drawing for my feral exhaust seen above if you are interested...heheh....

cheers for that Rob

Richard Holzl did a great job on Barls T4 exhaust in the superbug, I was very impressed with his set up.