I'm currently running an old Nissan L20B in my race buggy, mated to a 2-lt Kombi box. I'm looking to replace this with an SR20 (non-turbo) and have a couple of questions:

1) Any idea where I can get an adaptor plate and rough costs ?

2) Will the fly wheel from the L20 (which has been modified for the Kombi bell housing and starter motor fit onto the SR20, or will I need to get another one made ?

Thanks in advance ... Kimbo

I think John Sherman at http://www.volksconversions.com.au/ does a SR20 adapter plate, not sure if you'll need the flywheel too...

Unicap (aka Bill Croft) also makes them. if you use the same style of ring gear with the new motor you should be able to use your old starter setup.

Unicap
Bill Croft
34 Spinks Road
Llandilo, 2760
Phone: (02) 4777 4006
Fax: (02) 4777 4830
Email: billcroft@exemail.com.au
Speciality: Offroad, V8s, drag
ADL & ECU Dealer

Thanks guys, much aprpeciated.

Cheers ... Kimbo