Board Logo

what shocks do you run?
pickstock - February 7th, 2011 at 03:37 PM

just lookign for an idea of what everyone runs shock wise?

this is for the scouts budget build so although i know im goign to hear about people running FOX shocks and other big brand stuff im interested in standard ones?
anyone know some that fit?

cnfabo - February 7th, 2011 at 08:36 PM

Kyb's are a good upgrade,I think $300 a set,the race guys use Koni adjustables,hd Bilsteins.go on eshocks.com u can get them alot cheaper then here.

powerband - February 8th, 2011 at 07:18 PM

On my Baja I run Bilsteins on the back & KYB's up front. Bilsteins have more rebound which makes them more suitable for the back. I originally had Bilsteins up front but too much compression dampening made the front too harsh, so went for the KYB's. Much better. Paul

baghall - February 13th, 2011 at 12:05 PM

Have no idea. Were on Al when I bought him but was thinking of going to coil overs.To be honest have no idea of what is best for a baja so am interested in this thread.

matt - February 13th, 2011 at 04:53 PM

i run munroe gt gas shocks on my bug and manx, at about $130 a pair i think they are a good budget shocker

waveman1500 - February 13th, 2011 at 06:59 PM

I use Monroe GT Gas as well and they've always served me well, on and off road.

h - February 13th, 2011 at 07:23 PM

cofap oils - bog standard n will do the job up front :D

matberry - February 14th, 2011 at 08:02 AM

I won't recommend Monroe, ok on the rear but personally, way too heavy in the valving for the front, and questionable longevety IMO. For street/off road and std mounts, budget; I'd go KYB, could get away with Boge HD for a better quality ride at similar cost. Deluxe I'd go Bilistien ( they are fine on the front too if you get the correct shock) they are better than Koni's when it comes to any dirt/offroad work.

Yes, I have some Fox for my own car, but no testing yet and mine are not std fitment, but there are stock replacements available. They are made in China so make up your own mind. Kings are US I believe , and similar in design, but not sure if they do std fittment.

I got the Fox's for very cheap, so I thought I'd give them a go.... :) So far (no driving yet :td: ) the valving feels great.

bugzla - March 8th, 2011 at 04:42 PM

so are they all just stock numbers or are they made for a higher lift ive also have to get some shocks but dont want to get the wrong ones anybody with part numbers and brand woul be awesome or a site with a list

cheers
stevo