Board Logo

camber with accentric bush
cnfabo - February 18th, 2011 at 08:41 PM

how much camber can u get with the extra accentric bush without bending the top arm.....for a beetle...


mactaylor - February 19th, 2011 at 06:29 AM

i got 1.5 degrees max which is prob not gunna be enough.


cnfabo - February 19th, 2011 at 10:58 PM

cheers mac, looks like im bending the top arms then....


Aussie Dubbin - February 20th, 2011 at 01:06 PM

When i looked into it they all said bend them... i haven't put mine back together yet but, should be able to get 4* neg


Craig Torrens - February 20th, 2011 at 06:46 PM

It should give you 1.5- 2 deg more than your standard one..............so about 2.5 deg MAX.


cnfabo - February 20th, 2011 at 11:13 PM

will i need to run the clearenced ball joints or the stock ones will be fine.....being that the car is as low as any other hillclimb car....